Steel grades - Sheet piles

Hot rolled sections (except GU sections)

Mechanical properties according to EN 10248-1:1995 and comparable international standards. Other steel grades can be delivered on request.

Standard referred to: EN 10248-1:1995				Comparable international standards
Steel grade	Minimum yield strength ReH	Minimum tensile strength Rm	Minimum elongation	USA	Canada	Japan
	N/mm2	N/mm2	%	ASTM	CSA G 4021	JIS A 5528
S 240 GP	240	340	26
S 270 GP	270	410	24	A 328	Gr. 260 W
S 320 GP	320	440	23		Gr. 300 W
S 355 GP	355	480	22	A 572 Gr. 50; A 690	Gr. 350 W
S 390 GP	390	490	20	A 572 Gr. 55		SY 390
S 430 GP	430	510	19	A 572 Gr. 60	Gr. 400 W
ArcelorMittal Mill Specification
S 460 AP	460	550	17	A 572 Gr. 65

Grades S 460 AP, A 690 and A 572 Gr. 65 on request.

Hot rolled GU sections

Mechanical properties according to EN 10248-1:1995 and comparable international standards.

Standard referred to: EN 10248-1:1995				Comparable international standards
Steel grade	Minimum yield strength ReH	Minimum tensile strength Rm	Minimum elongation	USA	Canada
	N/mm2	N/mm2	%	ASTM	CSA G 4021
S 240 GP	240	340	26
S 270 GP	270	410	24	A 328	Gr. 260 W
S 320 GP	320	440	23		Gr. 300 W
S 355 GP	355	480	22	A 572 Gr. 50; A 690	Gr. 350 W

Grade S 355 GP on request.

Cold formed sections

Mechanical properties according to EN 10249-1:1995 and corresponding former national standards. Other steel grades can be delivered on request.

Standard referred to: EN 10249-1:1995				Former references
Steel grade	Minimum yield strength ReH	Minimum Tensile strength Rm	Minimum elongation	F	D	GB	B
	N/mm2	N/mm2	%
S 235 JRC	235	340-470	26	E 24-2	St 37.2	40 B	AE 235-B
S 275 JRC	275	410-560	22	E 28-2	St 44.2	43 B	AE 275-B
S 355 JOC	355	490-630	22	E 36-3	St 52.3 U	50 C	AE 355-C

The C in JRC and J0C stands for cold forming aptitude according to EN 10025:1993.