• NL  |  EN  |  FR
  • Calculation
  • Sitemap

Steel grades - HP piles

Structural steels

Mechanical properties according to EN 10025:2004 and corresponding former national standards. Other steel grades can be delivered on request.

Standard referred to:
EN 10025:2004		 Former references
Steel
grade		 Minimum yield strength ReH Tensile strength Rm Minimum elongation
 F D GB B
N/mm2 N/mm2 % NF A 35-501 DIN 17100 BS 4360 NBN
A21-101
Thickness
(mm)		 Thickness (mm) Thickness (mm)
 16 > 16
 40		  3
 100		  3
 40
S 235 JRG2 235 225 340-470 26 RSt 37-2 40 B
S 235 J0 235 225 340-470 26 E 24-3 St 37-3 U 40 C AE 235-C
S 275 JR 275 265 410-560 22 E 28-2 St 44-2 43 B AE 255-B
S 275 J0 275 265 410-560 22 E 28-3 St 44-3 U 43 C AE 255-C
S 355 JR 355 345 490-630 22 E 36-2 50 B AE 355-B
S 355 J0 355 345 490-630 22 E 36-3 St 52-3 U 50 C AE 355-C
S 355 J2G3/G4 355 345 490-630 22 St 52-3 N 50 D AE 355-D

High strength steels with high notch thoughness

Mechanical properties according to EN 10113-3:1993 and comparable international standards.

Standard referred to:
EN 10113-3:1993		 Comparable international standards
Steel
grade		 Minimum yield strength ReH Tensile strength Rm Minimum elongation
 USA Japan
N/mm2 N/mm2 % ASTM JIS G 3101
Epaisseur (mm)
 16 > 16
 40
S 355 M 355 345 450-610 22 A 913 Gr. 50
S 355 ML 355 345 450-610 22
S 460 M 460 440 530-720 17 A 913 Gr. 65 SM 570
S 460 ML 460 440 530-720 17

HISTAR® steels

High yield strength steels with excellent toughness and outstanding weldability (carbon equivalent lower than 0.41 %).

HP piles which are available in HISTAR® grades are indicated in this table. Other steel grades can be delivered on request.

HISTAR® Comparable international standards
Steel
grade		 Minimum yield strength ReH Tensile strength Rm Minimum elongation
 USA Japan
N/mm2 N/mm2 % ASTM
A 572
A 913		 ASTM
A 992		 JIS
G 3106
HISTAR 355 355 470-610 22 Gr. 50 Gr. 50 SM490B/C/YB
HISTAR 355 L 355 470-610 22 Gr. 50 Gr. 50 SM490B/C/YB
HISTAR 460 460 550-720 17 Gr. 65 SM570
HISTAR 460 L 460 550-720 17 Gr. 65 SM570

For all HISTAR® grades: notch impact test, longitudinal:  27 J at 0°C.